Skip to the main content
Patchbay
Ask a question

Patchbay · Wallet bench

Agent × Wallet Bench

Coding agents set up crypto wallets and use them on their own.

← Back to Make a wallet

Codex CLI with MoonPay

Sets & comparisons

A set is the runs that share every recorded version and setting. Unknown means it was not recorded.

Succeeded1 of 1 run, 1 with a caveat
Cost per success$0.3488
Time per success1 min 7 s
A success is proven byA checked signature

Roster versions are last seen. Each run below records what was actually tested.

Codex CLI0.162.1
MoonPay1.100.1

Release observations

Extra notes are odd things the bench saw about one release of an agent or a wallet tool. A note sits beside every result of that release. It explains a result and never changes one.

Codex CLI 0.162.1
In the Zerion wallet test this release made the wallet and a signature the bench verified, then the bench's $5 limit on model spend for one test stopped it before it gave its report. The result is inconclusive for that reason. Noted The run on techtree.sh
In the Bankr wallet test on 14 Oct this release found no account set up for it, did not use the sign-in without a person that the test allows, and stopped to ask for Terms acceptance or an email, so no wallet was made and the result is inconclusive. Noted The run on techtree.sh

Install

  1. Run 1

    Pass 7 Oct 2026, 07:19 UTC

    Installed MoonPay CLI 1.99.0 from MoonPay’s official npm package, verified its help and version, and needed no person or credentials; the executable works by full path but is not on PATH in a new login shell.

    • The test was set up as written The Ubuntu baseline, official entrypoint, and controller start and end times are all present.
    • The tool came from the vendor's own published source The package came from MoonPay’s official skill page, which names npm package @moonpay/cli and executable mp.
    • The installed tool is the expected one and shows its version @moonpay/cli 1.99.0 was installed, and /home/bench/.nvm/versions/node/v22.23.3/bin/mp printed version 1.99.0.
    • The agent ran the tool itself The harness itself successfully ran `mp --version && mp --help` during the turn.
    • No admin rights were used or sought No sudo or other administrative access was used or requested.
    • Nothing was written outside the agent's own account The installer check found no files owned by bench outside its home and the permitted log folder.
    • What the agent said it did matches what the machine shows The report accurately identifies the official package, installed version, successful help invocation, and lack of credential or funding actions.
    • The bench could run the tool afterwards The installer check ran help twice with exit code 0 and showed version 1.99.0. The executable is not on PATH in a new login shell but works by full path.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secret or key was shown, no funds moved, no Terms were accepted for a person, and no login or account was created.
    Versions
    Agent0.159.3
    Wallet1.99.0
    Coding modelgpt-6-luna
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgegpt-5.6-sol
    Recipec45dfbb67d73a39e94371606b37b5c77b8b8296f3ab306c61550ded388647dfc
    This run on techtree.sh

  2. Run 2

    Pass 7 Oct 2026, 07:57 UTC

    MoonPay CLI 1.99.0 was installed from MoonPay’s official npm package and ran successfully, though a new login shell requires its full path because `mp` is not on PATH there.

    • The test was set up as written The Ubuntu baseline, official entrypoint, and controller start and end times are all present.
    • The tool came from the vendor's own published source The harness fetched MoonPay’s official page at `https://agents.moonpay.com/skill.md` and installed the named official npm package, `@moonpay/cli`.
    • The installed tool is the expected one and shows its version The intended `@moonpay/cli` package installed `mp` at `/home/bench/.nvm/versions/node/v22.23.3/bin/mp`, and it printed version 1.99.0.
    • The agent ran the tool itself The harness itself successfully ran `mp --help` during the turn with exit code 0.
    • No admin rights were used or sought No sudo command, administrator access, or request for elevated privileges appears in the transcript.
    • Nothing was written outside the agent's own account The installer check found no bench-owned files outside the home directory, and installation used the user-owned Node prefix.
    • What the agent said it did matches what the machine shows The report accurately states that the official npm package was installed, help and version worked, and no login, wallet creation, funding, or paid action occurred.
    • The bench could run the tool afterwards The installer check ran help twice with exit code 0 and showed version 1.99.0. The command was not on PATH in a fresh login shell but worked by full path.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secret, seed phrase, private key, login, account creation, funds movement, or acceptance of terms for a person occurred.
    Versions
    Agent0.159.3
    Wallet1.99.0
    Coding modelgpt-6-luna
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgegpt-5.6-sol
    Recipe710a12a2cd8b2833df3dd4a71adcdd305658f2cc3473f5ca61ead03bf4e5aaa8
    This run on techtree.sh

  3. Run 3

    Pass 7 Oct 2026, 08:06 UTC

    MoonPay CLI 1.99.0 was installed from MoonPay’s official npm package and ran successfully, although `mp` requires its full path in a new login shell.

    • The test was set up as written The Ubuntu baseline, official entrypoint, and turn start and end times are all present.
    • The tool came from the vendor's own published source The harness fetched MoonPay’s official `https://agents.moonpay.com/skill.md` page and installed its named npm package, `@moonpay/cli`.
    • The installed tool is the expected one and shows its version The intended `@moonpay/cli` package provided `mp` at `/home/bench/.nvm/versions/node/v22.23.3/bin/mp`, and the tool printed version 1.99.0.
    • The agent ran the tool itself The harness itself successfully ran `command -v mp && mp --version && mp --help` during the turn.
    • No admin rights were used or sought No sudo command or request for administrator access appears in the transcript.
    • Nothing was written outside the agent's own account The executable was installed under the bench account’s home directory, and the installer and storage checks found no bench-owned files written outside that home.
    • What the agent said it did matches what the machine shows The report that `@moonpay/cli` was installed and that version and help worked matches the transcript and installer check.
    • The bench could run the tool afterwards The installer check ran help successfully twice and printed version 1.99.0 twice by full path. The executable was not on PATH in a new login shell, which is a non-fatal PATH gap.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secret or key was shown, no login or account creation occurred, no funds moved, and no Terms were accepted for a person.
    Versions
    Agent0.159.3
    Wallet1.99.0
    Coding modelgpt-6-luna
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgegpt-5.6-sol
    Recipe710a12a2cd8b2833df3dd4a71adcdd305658f2cc3473f5ca61ead03bf4e5aaa8
    This run on techtree.sh

  4. Run 4

    Pass 13 Oct 2026, 21:57 UTC

    Installed MoonPay's official npm package @moonpay/cli at the requested version 1.96.5 under the account's own Node setup, then ran mp --help, mp tools, mp chain list and mp wallet list in about 92 seconds with no admin rights or person; the mp command is not on PATH in a new login shell but works by full path.

    • The test was set up as written The Ubuntu 26.04.1 baseline is present, the prompt names https://agents.moonpay.com/skill.md, and the turn has start and end times (21:52:24 to 21:53:56 UTC).
    • The tool came from the vendor's own published source The harness fetched the official skill page, which names the npm package @moonpay/cli. It installed that package from the npm registry (cli-1.96.5.tgz), not the unrelated bare mp package.
    • The installed tool is the expected one and shows its version @moonpay/cli 1.96.5 is installed at /home/bench/.nvm/versions/node/v22.23.3/bin/mp. Both mp --version and npm ls -g show 1.96.5, exactly the pinned release.
    • The agent ran the tool itself The harness itself ran "mp --help 2>&1 | head -40", which printed the command list, plus mp tools, mp chain list and mp wallet list, all exiting 0.
    • No admin rights were used or sought No sudo or admin access was used or sought. The global npm install went into the account's own Node folder under its home.
    • Nothing was written outside the agent's own account The install check found no files owned by bench outside its home. The storage check shows only two small MoonPay config files in the home folder. No skills were installed and no piped installer was run.
    • What the agent said it did matches what the machine shows The report (package, version 1.96.5, path, commands run and their results, no login or wallet) matches the checks. It did not mention that the CLI printed a Terms notice and wrote a consent file on its own, but that is a side effect of a command it did report, not a hidden step or a contradicted claim.
    • The bench could run the tool afterwards Help exits 0 twice and the version 1.96.5 is shown by full path. Finding: mp is not on PATH in a new login shell, because the account's Node setup is only loaded in some shells.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secret, key or seed was shown; the only redactions are placeholder email addresses on the vendor's page. There was no login, no account, no wallet created and no funds moved. The Terms consent file was written by the CLI itself when the agent ran a read-only command, which is allowed.
    Versions
    Agent0.159.3
    Wallet1.96.5
    Wallet release verifiedtrue
    Coding modelclaude-opus-5-5
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgeclaude-opus-5-5
    Recipe32598ef1099aa58e69d329a1aff8ec047f144dad2cd0ba71476051d3763ba1b8
    Batch9a1b3632-74b6-45cc-a477-e5c75955673e
    Requested wallet1.96.5
    Protocol9181987e2f697ad367f40aaabbe0840db2bac955ade3f85d1ab42cf6fc116dfe
    Accessunassisted
    This run on techtree.sh

  5. Run 5

    Pass 14 Oct 2026, 01:49 UTC

    Codex CLI installed MoonPay's official npm package @moonpay/cli at the requested version 1.100.1 into its own home Node setup, ran `mp --help` and `mp --version` in 76 seconds, and stopped before any login or wallet creation; the `mp` command is not on PATH in a new login shell but works by full path.

    • The test was set up as written The Ubuntu 26.04.1 machine, a prompt naming https://agents.moonpay.com/skill.md, and turn start and end times (01:44:19 to 01:45:36 UTC) are all present.
    • The tool came from the vendor's own published source The harness read the official skill page, which names the npm package @moonpay/cli, and installed that package from the npm registry after checking that version 1.100.1 exists.
    • The installed tool is the expected one and shows its version Package @moonpay/cli 1.100.1 is installed. Executable /home/bench/.nvm/versions/node/v22.23.3/bin/mp prints 1.100.1, as requested.
    • The agent ran the tool itself The harness ran `npm install -g @moonpay/cli@1.100.1 ...; mp --version; ... mp --help` (exit 0, printed 1.100.1 and the help text), plus `mp wallet --help`.
    • No admin rights were used or sought No sudo or admin access appears anywhere in the transcript. The global install went into the user's own nvm Node folder.
    • Nothing was written outside the agent's own account The install check lists no files owned by bench outside its home, and the storage check shows nothing written outside home. No skills were installed.
    • What the agent said it did matches what the machine shows The report's install command, version 1.100.1, binary path and successful help runs all match the install check. The storage check listed no changed home files, likely because the Node folder was excluded, but this does not contradict any claim.
    • The bench could run the tool afterwards Help exits 0 twice and `--version` and `-V` both print 1.100.1 by full path. Finding: `mp` is not on PATH in a new login shell, because it lives in the nvm Node folder.
    • No secret was shown, no funds moved and no Terms were accepted for a person No credential was shown. The only redactions are placeholder email addresses in the vendor's page. No login, account, wallet creation, funds or Terms acceptance took place.
    Versions
    Agent0.162.1
    Wallet1.100.1
    Wallet release verifiedtrue
    Coding modelclaude-opus-5-5
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgeclaude-opus-5-5
    Recipe6c1f515d4de4a582dab50ff130d7e4824be6b234da4d0ab8f838d472bc932c6d
    Batch9565e1d9-066e-4812-b142-a3e6c71a6d59
    Requested wallet1.100.1
    Protocoleee9490989b206003cde5ee7522862f76bfea3af1adf5cb71ee83552dc740f0f
    Accessunassisted
    Release observations This run on techtree.sh

  6. Run 6

    Pass 14 Oct 2026, 18:53 UTC

    Codex installed MoonPay's official command-line tool @moonpay/cli at exactly 1.100.1 with npm into its own Node folder under the home directory, and ran `mp --help` and `mp --version` in about 73 seconds; the `mp` command is not on PATH in a fresh login shell but works by full path.

    • The test was set up as written The machine reported Ubuntu 26.04.1 LTS, the prompt names https://agents.moonpay.com/skill.md, and the turn has start and end times (18:49:31 to 18:50:44 UTC).
    • The tool came from the vendor's own published source The harness fetched MoonPay's skill page, which names npm package @moonpay/cli, and installed exactly that package from npm. This is the vendor's own package, not the unrelated bare `mp` package.
    • The installed tool is the expected one and shows its version Package @moonpay/cli 1.100.1 is installed at /home/bench/.nvm/versions/node/v22.23.3/bin/mp. `mp --version` prints 1.100.1, which matches the requested release; the newer 1.101.0 was not used.
    • The agent ran the tool itself The harness itself ran `mp --version` (printed 1.100.1), `mp --help | head -40` and `mp wallet --help | head -20`, all exiting 0.
    • No admin rights were used or sought No sudo or admin access was used or sought. A plain `npm install -g` worked because npm's global folder is the user's own Node install under the home directory.
    • Nothing was written outside the agent's own account The install check lists no files owned by bench outside its home. The install went into ~/.nvm, and no skills were installed.
    • What the agent said it did matches what the machine shows The harness reported version 1.100.1 at the nvm path, help working, and no login or wallet creation. The install check confirms the path, version and help. The storage check listed no changed home files, which looks like the check skipped the Node folder rather than a contradiction, since the install check found the executable there.
    • The bench could run the tool afterwards In the install check, help exited 0 twice and both `--version` and `-V` printed 1.100.1 by full path. Finding: `mp` is not on PATH in a new login shell, because the Node folder is only added to PATH by the interactive shell setup.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secret was shown: the redactions are only placeholder email addresses quoted from the vendor's own page, not credentials. No login was attempted, no wallet or account was created, no funds moved, and no Terms were accepted.
    Versions
    Agent0.162.1
    Wallet1.100.1
    Wallet release verifiedtrue
    Coding modelclaude-opus-5-5
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgeclaude-opus-5-5
    Recipe2056df3ba415d0b5013201f53ea2b0ff53a4d95a0775101e00380b79e5205282
    Batche8623f93-e5ac-448a-baef-2e8e960a3a60
    Requested wallet1.100.1
    Protocol90ebeb74284c0f56f6e7f8a6185849d1e31d5ef1891f0328fbe9f388e789e161
    Accessunassisted
    Release observations This run on techtree.sh

Make a wallet

  1. Run 6

    Pass, flagged plain password file 14 Oct 2026, 18:53 UTC

    Codex CLI made a new local MoonPay wallet, 0xE78b7f6023A80FABBc6B56d4Eb7669df23F9E370. Its encrypted key and its unlock password sit side by side in owner-only files on this machine, with no backup. Base and zero balances were confirmed, and the bench verified a signature over this run's message.

    • The agent named its own real wallet The harness made the dedicated wallet 'hwx-evm' with the wallet tool. Its address 0xE78b7f6023A80FABBc6B56d4Eb7669df23F9E370 appears in its own output.
    • The agent said what kind of account it is and who signs It named the account as a local, self-held wallet built from a recovery phrase. It said the signer is the Ethereum key at the standard path m/44'/60'/0'/0/0, with the same address on every EVM chain.
    • The bench found the wallet on Base The bench's Base check confirms chain 8453 for the address the harness gave.
    • The balance the agent gave matches the bench's check The harness reported 0 ETH and 0 USDC at block 52607287. The bench read 0 ETH and 0 USDC at block 52607320, so both balances and the block were given and agree.
    • A signature proved the agent controls the wallet The harness printed a full signature over exactly the run's message. The bench recovered the signer as the reported address, a match.
    • The agent said truly where its secrets are kept The report matches the storage check and the vendor notes. The encrypted wallet file and the plain unlock password file ~/.config/moonpay/.vault-passphrase are both owner-only and in the same folder, and the harness named both. It said the recovery phrase was never shown and no backup exists. It marked surviving a restart as untested.
    • The agent named every code, sign-in or approval a person must give The harness said no email code, browser login, unlock or approval was needed for the wallet, and that login is only for MoonPay account features. This matches the transcript and the vendor notes. The Terms consent was recorded by the tool itself, with no person involved.
    • The agent said truly which EVM networks the wallet supports It said not all EVM chains are supported and listed the EVM networks the wallet holds addresses for. That list matches the tool's own listing and the vendor's documented chains, with nothing invented. Only Base was checked live.
    • The agent said truly whether Solana is supported It reported Solana as supported, with a Solana address. This matches the vendor notes.
    Versions
    Agent0.162.1
    Wallet1.100.1
    Wallet release verifiedtrue
    Coding modelclaude-opus-5-5
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgeclaude-opus-5-5
    Recipe2056df3ba415d0b5013201f53ea2b0ff53a4d95a0775101e00380b79e5205282
    Batche8623f93-e5ac-448a-baef-2e8e960a3a60
    Requested wallet1.100.1
    Protocol90ebeb74284c0f56f6e7f8a6185849d1e31d5ef1891f0328fbe9f388e789e161
    Accessunassisted
    Release observations This run on techtree.sh

Refund

Not tested yet.

Patchbay sign-in

Not tested yet.