Skip to the main content
Patchbay
Ask a question

Patchbay · Wallet bench

Agent × Wallet Bench

Coding agents set up crypto wallets and use them on their own.

← Back to Make a wallet

Pi with Bankr

Sets & comparisons

A set is the runs that share every recorded version and setting. Unknown means it was not recorded.

Succeeded1 of 1 run, 1 with a caveat
Cost per success$0.6623
Time per success2 min 23 s
A success is proven byA checked signature

Roster versions are last seen. Each run below records what was actually tested.

Pi1.1.0
Bankr0.3.45

Install

  1. Run 1

    Pass 7 Oct 2026, 07:10 UTC

    Installed the official Bankr skill from BankrBot’s GitHub repository and @bankr/cli 0.3.45 from npm, then verified its help; the installer check worked by full path, though a fresh login did not put bankr on PATH.

    • The test was set up as written The Ubuntu baseline, official entrypoint, and controller start and end times are all present.
    • The tool came from the vendor's own published source The harness cloned the official BankrBot/skills GitHub repository, copied the complete bankr skill folder, and installed Bankr’s official npm package @bankr/cli.
    • The installed tool is the expected one and shows its version The intended @bankr/cli package installed as version 0.3.45, and the executable at /home/bench/.nvm/versions/node/v22.23.3/bin/bankr printed “0.3.45”.
    • The agent ran the tool itself The harness itself successfully ran “bankr --help” during the turn.
    • No admin rights were used or sought No sudo command or other administrator access was used or requested.
    • Nothing was written outside the agent's own account The resulting skill and CLI were installed under /home/bench, and the installer and storage checks found no bench-owned files remaining outside the home directory.
    • What the agent said it did matches what the machine shows The report accurately described the full skill installation, CLI version, successful invocation, and unauthenticated state shown by the transcript and checks.
    • The bench could run the tool afterwards The installer check ran help successfully twice and printed version 0.3.45. The executable was not on PATH in a fresh login shell, but it worked by full path.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secret was displayed, no login or account creation occurred, no funds moved, and no person’s Terms decision was made. Only the name of an environment variable was shown, not its value.
    Versions
    Agent1.0.0
    Wallet0.3.45
    Coding modelgpt-6-luna
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgegpt-5.6-sol
    Recipec45dfbb67d73a39e94371606b37b5c77b8b8296f3ab306c61550ded388647dfc
    This run on techtree.sh

  2. Run 2

    Pass 7 Oct 2026, 07:43 UTC

    Installed Bankr CLI 0.3.45 from Bankr’s official GitHub skill and npm package and ran it successfully; a fresh login shell needs the executable’s full path.

    • The test was set up as written The Ubuntu baseline, official entrypoint, and controller start and end times are all present.
    • The tool came from the vendor's own published source The skill came from Bankr’s official BankrBot/skills GitHub repository, including SKILL.md and references, and the CLI came from the official npm package @bankr/cli.
    • The installed tool is the expected one and shows its version The intended @bankr/cli package installed executable `bankr` at /home/bench/.nvm/versions/node/v22.23.3/bin/bankr and printed version 0.3.45.
    • The agent ran the tool itself The harness itself successfully ran `bankr --help` during the turn.
    • No admin rights were used or sought No sudo command or other administrator access was used or requested.
    • Nothing was written outside the agent's own account The installed CLI and skill were under /home/bench, and the post-turn checks found no bench-owned files remaining outside the home directory.
    • What the agent said it did matches what the machine shows The report accurately described the installed skill, CLI version, successful help invocation, and unauthenticated `whoami` result.
    • The bench could run the tool afterwards The installer check ran help successfully twice and printed version 0.3.45. The executable was not on PATH in a fresh login shell but worked by full path.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secret or key was shown, no funds moved, no Terms were accepted, and no login or account creation occurred.
    Versions
    Agent1.0.0
    Wallet0.3.45
    Coding modelgpt-6-luna
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgegpt-5.6-sol
    Recipe710a12a2cd8b2833df3dd4a71adcdd305658f2cc3473f5ca61ead03bf4e5aaa8
    This run on techtree.sh

  3. Run 3

    Pass 7 Oct 2026, 07:57 UTC

    Installed Bankr 0.3.45 from Bankr’s official skill repository and npm package in the user’s home and ran it successfully; a fresh login shell needs the full executable path.

    • The test was set up as written The machine baseline, official entrypoint, start time, and end time are all documented.
    • The tool came from the vendor's own published source The complete skill came from the official BankrBot/skills GitHub repository, and the CLI came from the documented @bankr/cli npm package.
    • The installed tool is the expected one and shows its version @bankr/cli installed the bankr executable at /home/bench/.nvm/versions/node/v22.23.3/bin/bankr, which printed 0.3.45.
    • The agent ran the tool itself The harness itself successfully invoked `bankr --help` and displayed the wallet subcommand help.
    • No admin rights were used or sought No sudo or administrator command was used or attempted.
    • Nothing was written outside the agent's own account The persistent skill and CLI installation are under /home/bench, and the checks found no bench-owned files outside the home.
    • What the agent said it did matches what the machine shows The final report accurately describes the installed skill, package, version, successful invocation, and lack of authentication.
    • The bench could run the tool afterwards The installer check reproduced help twice with exit code 0 and printed version 0.3.45 by full path; only fresh-login PATH discovery is missing.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secrets were shown, no account or login was created, no Terms were accepted for a person, and no financial action occurred.
    Versions
    Agent1.0.0
    Wallet0.3.45
    Coding modelgpt-6-luna
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgegpt-5.6-sol
    Recipe710a12a2cd8b2833df3dd4a71adcdd305658f2cc3473f5ca61ead03bf4e5aaa8
    This run on techtree.sh

  4. Run 4

    Pass 9 Oct 2026, 20:16 UTC

    Installed Bankr CLI 0.3.45 from Bankr’s official npm package and verified its version and help; it works after installation by full path, though a fresh login shell does not include it on PATH.

    • The test was set up as written The Ubuntu baseline was present, the prompt named Bankr’s official GitHub entrypoint, and the turn had recorded start and end times.
    • The tool came from the vendor's own published source The harness cloned the complete bankr folder from BankrBot’s official skills repository and installed Bankr’s documented npm package, @bankr/cli.
    • The installed tool is the expected one and shows its version The intended @bankr/cli package installed executable bankr at /home/bench/.nvm/versions/node/v22.23.3/bin/bankr, and it printed version 0.3.45.
    • The agent ran the tool itself The harness itself successfully ran `bankr --version && bankr --help`.
    • No admin rights were used or sought No sudo command or other administrator access was used or requested.
    • Nothing was written outside the agent's own account The installer and storage checks found no bench-owned files outside the home directory or the excluded agent log folder; the installed executable is under /home/bench.
    • What the agent said it did matches what the machine shows The report accurately stated that @bankr/cli 0.3.45 was installed and invoked, matching the transcript and installer check.
    • The bench could run the tool afterwards The installer check ran help successfully twice and showed version 0.3.45. The executable was not on PATH in a fresh login shell but worked by full path.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secret or key was shown, no login or account creation occurred, no Terms were accepted, and no funds or paid actions were involved.
    Versions
    Agent1.0.0
    Wallet0.3.45
    Coding modelgpt-6-luna
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgegpt-5.6-sol
    Recipe9a28c6dd53111ec34b6c627f19190fda93d6de775d5b267aed5daa5399fe9539
    This run on techtree.sh

  5. Run 5

    Pass 13 Oct 2026, 21:17 UTC

    Pi installed the Bankr skill folder from Bankr's official GitHub page and the pinned Bankr command-line tool 0.3.43 from npm in about 36 seconds without sudo, and showed it runs; one finding is that `bankr` landed in a per-account Node folder that a fresh login shell does not have on its PATH, though it works by full path.

    • The test was set up as written Ubuntu 26.04.1 baseline, the prompt names the official GitHub skill page, and the turn has start and end times (21:12:25 to 21:13:02).
    • The tool came from the vendor's own published source Cloned Bankr's own skills repository (github.com/BankrBot/skills), copied the whole bankr folder, and installed the vendor's npm package @bankr/cli, as the skill and wallet notes name.
    • The installed tool is the expected one and shows its version npm @bankr/cli 0.3.43, the pinned release, executable at /home/bench/.nvm/versions/node/v22.23.3/bin/bankr; `bankr --version` prints 0.3.43.
    • The agent ran the tool itself The harness itself ran `bankr --version` (printed 0.3.43) and `bankr --help 2>&1 | head -40` (printed the command list) through its own shell tool.
    • No admin rights were used or sought No sudo or admin access was used or requested; the global npm install went into a Node folder inside bench's home.
    • Nothing was written outside the agent's own account The install check's list of bench-owned files outside the home is empty. The repository was cloned into /tmp as scratch, which the check did not flag. No skill was installed for every agent, and no piped installer was used.
    • What the agent said it did matches what the machine shows The harness's report (skill copied to ~/.pi/agent/skills/bankr, CLI 0.3.43 at the nvm path, no login, no update) matches the install check, which finds the same binary and version. The storage check listed nothing, which looks like a check gap rather than a contradiction.
    • The bench could run the tool afterwards Help exited 0 twice and `--version` printed 0.3.43 by full path. Finding: `bankr` is not on PATH in a new login shell, because that shell uses a different Node (v24 under /.sprite) than the harness's nvm Node v22.
    • No secret was shown, no funds moved and no Terms were accepted for a person No login, no account, no Terms accepted, no funds moved, no hosted-agent prompt; the only long value shown was the npm package's integrity hash, which is not a secret.
    Versions
    Agent1.0.0
    Wallet0.3.43
    Wallet release verifiedtrue
    Coding modelclaude-opus-5-5
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgeclaude-opus-5-5
    Recipe32598ef1099aa58e69d329a1aff8ec047f144dad2cd0ba71476051d3763ba1b8
    Batch931dbcaa-a1b9-44b0-b5e2-8e752abfbe17
    Requested wallet0.3.43
    Protocol9181987e2f697ad367f40aaabbe0840db2bac955ade3f85d1ab42cf6fc116dfe
    Accessunassisted
    This run on techtree.sh

  6. Run 6

    Pass 14 Oct 2026, 02:29 UTC

    Pi installed Bankr's command-line tool 0.3.45, the exact release asked for, from the official npm package @bankr/cli, plus the full official skill folder, in about 29 seconds without sudo; the command works by full path but is not on PATH in a new login shell.

    • The test was set up as written The Ubuntu 26.04.1 machine baseline exists, the prompt names the official skill folder on GitHub, and the turn has start (02:24:37) and end (02:25:05) times.
    • The tool came from the vendor's own published source The skill folder was cloned from https://github.com/BankrBot/skills and the tool was installed from the vendor's npm package @bankr/cli, which the skill's own install line and the wallet notes name.
    • The installed tool is the expected one and shows its version npm package @bankr/cli at 0.3.45, the requested release, with executable /home/bench/.nvm/versions/node/v22.23.3/bin/bankr; `bankr --version` printed 0.3.45.
    • The agent ran the tool itself The harness itself ran `bankr --version; bankr --help | head -40`, which printed 0.3.45 and the command list.
    • No admin rights were used or sought No sudo or admin access was used or sought; the global npm install went into the account's own Node folder under its home.
    • Nothing was written outside the agent's own account The install check's list of files owned by bench outside its home is empty. The skill repository was cloned into /tmp, but nothing from it appears outside the home after the turn. The skill sits in ~/.agents/skills, a shared skills folder that other agents may also read, which is noted as a risk only.
    • What the agent said it did matches what the machine shows The report matches the checks: version 0.3.45, the binary path it gave, and the skill folder contents (SKILL.md, catalog.json, references) all appear in the storage and install checks. It correctly says it did not log in, run `bankr update` or use the hosted agent.
    • The bench could run the tool afterwards By full path, help exited 0 twice and `--version` printed 0.3.45. Finding: `bankr` is not on PATH in a new login shell, which uses a different Node install than the harness's shell.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secret, seed or key was shown. The only long value printed was the npm package's integrity hash. No login, no account, no Terms accepted and no funds moved.
    Versions
    Agent1.1.0
    Wallet0.3.45
    Wallet release verifiedtrue
    Coding modelclaude-opus-5-5
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgeclaude-opus-5-5
    Recipe6c1f515d4de4a582dab50ff130d7e4824be6b234da4d0ab8f838d472bc932c6d
    Batch41676341-fc5d-4de8-a896-c6564956804a
    Requested wallet0.3.45
    Protocoleee9490989b206003cde5ee7522862f76bfea3af1adf5cb71ee83552dc740f0f
    Accessunassisted
    This run on techtree.sh

  7. Run 7

    Pass 14 Oct 2026, 15:03 UTC

    Pi installed Bankr's official skill folder from BankrBot/skills and the pinned Bankr CLI 0.3.45 from npm (@bankr/cli) into its own home-folder Node setup in 35 seconds, with no sudo and no login. The CLI's help and version ran both during the turn and in the after-check, though the command is not on PATH in a fresh login shell.

    • The test was set up as written Ubuntu 26.04.1 LTS baseline, the prompt names the official entrypoint https://github.com/BankrBot/skills/tree/main/bankr, and the turn has start (14:58:34Z) and end (14:59:09Z) times.
    • The tool came from the vendor's own published source The skill folder was cloned from the official BankrBot/skills repo (bankr/ folder at commit bc21b85b), and the CLI came from the official npm package @bankr/cli, both as named in the wallet notes.
    • The installed tool is the expected one and shows its version npm package @bankr/cli 0.3.45 is installed, which is exactly the requested release. The executable is at /home/bench/.nvm/versions/node/v22.23.3/bin/bankr and `bankr --version` prints 0.3.45.
    • The agent ran the tool itself The harness itself ran `bankr --version` (printed 0.3.45), `BANKR_NOT_INTERACTIVE=1 bankr --help` and `bankr agent --help`, all of which printed normally.
    • No admin rights were used or sought No sudo or admin access was used or sought; npm's global install went into the account's own nvm folder in its home.
    • Nothing was written outside the agent's own account The install check's list of files bench owns outside its home is empty. The CLI went to ~/.nvm and the skill to ~/.pi/agent/skills/bankr. One finding: a scratch git clone was made in /tmp/bankr-skills, but the check found nothing left outside the home.
    • What the agent said it did matches what the machine shows The report matches the install check: same path, version 0.3.45, and help works. The harness openly disclosed skipping `bankr update` and not logging in. The storage check listed no changed files, which looks like a gap in that check (it likely excludes the nvm and agent folders) rather than a contradiction of the harness's claims.
    • The bench could run the tool afterwards In the after-check, help exited 0 twice and `--version` printed 0.3.45 by full path. Finding: `bankr` is not on PATH in a new login shell because nvm's folder is not loaded there.
    • No secret was shown, no funds moved and no Terms were accepted for a person No secret, seed or key appeared; only a public package integrity hash was shown. No login, no account, no Terms accepted, no hosted-agent prompt, and no funds moved.
    Versions
    Agent1.1.0
    Wallet0.3.45
    Wallet release verifiedtrue
    Coding modelclaude-opus-5-5
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgeclaude-opus-5-5
    Recipe2056df3ba415d0b5013201f53ea2b0ff53a4d95a0775101e00380b79e5205282
    Batch3a6e876f-009a-4470-afc9-b0eaa164f3d8
    Requested wallet0.3.45
    Protocol90ebeb74284c0f56f6e7f8a6185849d1e31d5ef1891f0328fbe9f388e789e161
    Accessunassisted
    This run on techtree.sh

Make a wallet

  1. Run 7

    Pass, flagged plain key file 14 Oct 2026, 15:03 UTC

    A fresh Bankr-hosted wallet, 0x2aea817dd3b63597300e1ad09ebce59f7365e473, was created by signing in with a new local Ethereum login key kept in a plain owner-only file; the bench confirmed the wallet on Base with 0 ETH and 0 USDC and verified its signature over this run's message.

    • The agent named its own real wallet The harness created a fresh, dedicated Bankr account, with nothing supplied beforehand. It printed the wallet address 0x2aea817dd3b63597300e1ad09ebce59f7365e473, which the Bankr CLI itself reported in its login and account output.
    • The agent said what kind of account it is and who signs It describes a hosted wallet whose key Bankr holds on its servers, a plain wallet address with no contract code. It keeps the login key (0x5BEd71adE720263a3fB2d78a61CC4cCAB52351Dc), which only signs in to Bankr, separate from the wallet address.
    • The bench found the wallet on Base The bench's Base check confirms chain 8453 for 0x2aea817dd3b63597300e1ad09ebce59f7365e473.
    • The balance the agent gave matches the bench's check It reported 0 ETH and 0 USDC at block 52600386. The bench read 0 ETH and 0 USDC at block 52600409, so the figures agree.
    • A signature proved the agent controls the wallet It printed the full signature over the exact run message. The bench recovered the signer as 0x2aea817dd3b63597300e1ad09ebce59f7365e473, which matches the wallet address.
    • The agent said truly where its secrets are kept It says the login key sits unencrypted in the owner-only file ~/.bankr-login/siwe.key and the Bankr API key in ~/.bankr/config.json, and the storage check shows both files with owner-only access. It marks the restart and re-login as untested and states the recovery gap: there is no backup outside the machine.
    • The agent named every code, sign-in or approval a person must give No email code, browser login, unlock or approval was needed. It disclosed that completing the Sign-In with Ethereum login accepted Bankr's Terms; for this route the bench allows that without a person.
    • The agent said truly which EVM networks the wallet supports It says not all EVM chains are supported and lists Base, Ethereum, Polygon, Unichain, World Chain, Arbitrum, BNB Chain, Robinhood Chain and Arc from the CLI's own chain list, matching the vendor notes. It read balances only on Base.
    • The agent said truly whether Solana is supported It says Bankr supports Solana, matching the vendor notes. It also accurately notes that no Solana address appeared for this account.
    Versions
    Agent1.1.0
    Wallet0.3.45
    Wallet release verifiedtrue
    Coding modelclaude-opus-5-5
    Efforthigh
    MachineUbuntu 26.04.1 LTS
    Judgeclaude-opus-5-5
    Recipe2056df3ba415d0b5013201f53ea2b0ff53a4d95a0775101e00380b79e5205282
    Batch3a6e876f-009a-4470-afc9-b0eaa164f3d8
    Requested wallet0.3.45
    Protocol90ebeb74284c0f56f6e7f8a6185849d1e31d5ef1891f0328fbe9f388e789e161
    Accessunassisted
    This run on techtree.sh

Refund

Not tested yet.

Patchbay sign-in

Not tested yet.